EasyManuals Logo

Juniper EX3400 Features Guide

Juniper EX3400
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #394 background imageLoading...
Page #394 background image
Table 17: show dhcp relay binding Output Fields (continued)
Level of
OutputField DescriptionField Name
brief detailState of the DHCP relay address binding table on the DHCP
client:
BOUND—Client has an active IP address lease.
INIT—Initial state.
REBINDING—Client is broadcasting a request to renew the
IP address lease.
RELEASE—Client is releasing the IP address lease.
RENEWING—Client is sending a request to renew the IP
address lease.
REQUESTING—Client is requesting a DHCP server.
SELECTING—Client is receiving offers from DHCP servers.
State
briefIncoming client interface.Interface
detailDate and time at which the client’s IP address lease expires.Lease Expires
detailNumber of seconds in which the lease expires.Lease Expires in
detailDate and time at which the client’s IP address lease started.Lease Start
detailLease time violation has occurred.Lease time violated
detailClient’s incoming interface.Incoming Client Interface
detailIP address of the DHCP server.Server IP Address
detailInterface of the DHCP server.Server Interface
detailIP address of BOOTP relay.Bootp Relay Address
All levelsType of DHCP packet processing performed on the router:
active—Router actively processes and relays DHCP packets.
passive—Router passively snoops DHCP packets passing
through the router.
Type
All levelsDate and time at which the client’s IP address lease expires.Lease expires at
detailName of dual stack that is configured with the DHCP binding.Dual Stack Group
detailPrefix of dual stack DHCPv6 peer.Dual Stack Peer Prefix
detailAddress of the dual stack DHCPv6 peer.Dual Stack Peer Address
Copyright © 2017, Juniper Networks, Inc.374
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches

Table of Contents

Other manuals for Juniper EX3400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX3400 and is the answer not in the manual?

Juniper EX3400 Specifications

General IconGeneral
Switch typeManaged
Switch layerL2/L3
Quality of Service (QoS) supportYes
SafetyUL-UL60950-1, C-UL CAN/CSA 22.2 No.60950-1, TUV/GS to EN 60950-1, CB-IEC60950-1, EN 60825-1
Form factor1U
Product colorBlack
Electromagnetic compatibilityFCC 47CFR 15 A, EN 55022 A, ICES-003 A, VCCI A, AS/NZS CISPR 22 A, CISPR 22 A, EN 55024, EN 300386, CE
SFP+ module slots quantity4
QSFP+ module slots quantity2
Installed SFP+ modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity48
Memory typeDRAM
Noise level35 dB
Flash memory2000 MB
Processor frequency1000 MHz
Virtual stacking (units)10
Throughput250 Mpps
Jumbo frames9216
MAC address table32000 entries
Number of VLANs4093
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3z
Virtual LAN featuresPort-based VLAN
Copper ethernet cabling technology10BASE-T, 100BASE-T, 1000BASE-T
Power consumption (max)120 W
Number of power supply units1
Operating altitude0 - 3048 m
Non-operating altitude3048 - 4877 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 85 %
DHCP featuresDHCP server, DHCP client
AuthenticationMAC-based authentication, Port-based authentication
Security algorithms802.1x RADIUS, HTTPS, SNMP, SSH-2
Fiber ethernet cabling technology1000BASE-X
Weight and Dimensions IconWeight and Dimensions
Depth350 mm
Width437 mm
Height44 mm
Weight5740 g

Related product manuals