Table 18: show dhcp server binding Output Fields (continued)
Level of OutputField DescriptionField Name
detailIPv6 address of peer.Dual Stack Peer Address
Sample Output
show dhcp server binding
user@host> show dhcp server binding
IP address Session Id Hardware address Expires State Interface
198.51.100.15 6 00:00:5e:00:53:01 86180 BOUND ge-1/0/0.0
198.51.100.16 7 00:00:5e:00:53:02 86180 BOUND ge-1/0/0.0
198.51.100.17 8 00:00:5e:00:53:03 86180 BOUND ge-1/0/0.0
198.51.100.18 9 00:00:5e:00:53:04 86180 BOUND ge-1/0/0.0
198.51.100.19 10 00:00:5e:00:53:05 86180 BOUND ge-1/0/0.0
show dhcp server binding detail
user@host> show dhcp server binding detail
Client IP Address: 198.51.100.15
Hardware Address: 00:00:5e:00:53:01
State: BOUND(LOCAL_SERVER_STATE_BOUND_ON_INTF_DELETE)
Lease Expires: 2009-07-21 10:10:25 PDT
Lease Expires in: 86151 seconds
Lease Start: 2009-07-20 10:10:25 PDT
Incoming Client Interface: ge-1/0/0.0
Server Ip Address: 198.51.100.9
Server Interface: none
Session Id: 6
Client Pool Name: 6
Liveness Detection State: UP
Client IP Address: 198.51.100.16
Hardware Address: 00:00:5e:00:53:02
State: BOUND(LOCAL_SERVER_STATE_BOUND_ON_INTF_DELETE)
Lease Expires: 2009-07-21 10:10:25 PDT
Lease Expires in: 86151 seconds
Lease Start: 2009-07-20 10:10:25 PDT
Lease time violated: yes
Incoming Client Interface: ge-1/0/0.0
Server Ip Address: 198.51.100.9
Server Interface: none
Session Id: 7
Client Pool Name: 7
Liveness Detection State: UP
When DHCP binding is configured with dual-stack, we get the following output:
user@host> show dhcp server binding detail
Client IP Address: 100.20.0.10
Hardware Address: 00:00:64:03:01:02
State: BOUND(LOCAL_SERVER_STATE_BOUND)
Copyright © 2017, Juniper Networks, Inc.382
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches