Juniper EX3400

Table 20: show dhcp server statistics Output Fields (continued)
Field DescriptionField Name
Number of DHCP messages sent.
• BOOTREPLY—Number of BOOTP PDUs transmitted
• DHCPOFFER—Number of DHCP OFFER PDUs transmitted
• DHCPACK—Number of DHCP ACK PDUs transmitted
• DHCPNACK—Number of DHCP NACK PDUs transmitted
• DHCPFORCERENEW—Number of DHCP FORCERENEW PDUs transmitted
• DHCPLEASEUNASSIGNED—Number of DHCP leases that are managed by the server but have not
yet been assigned
• DHCPLEASEUNKNOWN—Number of unknown DHCP leases
• DHCPLEASEACTIVE—Number of active DHCP leases
• DHCPLEASEQUERYDONE—The leasequery is complete
Messages sent
Total number of bulk leasequery connections accepted by the server.Total Accepted
Connections
Total number of bulk leasequery connections not accepted by the server.Total Not-Accepted
Connections
Number of bulk leasequery connections that the server closed due to an internal error.ConnectionsClosed due
to Errors
Number of bulk leasequery connections that the server closed because the maximum number of
empty replies was reached.
ConnectionsClosed due
to max-empty-replies
Number of bulk leasequery connections on the server.In-flight Connections
Sample Output
show dhcp server statistics
user@host> show dhcp server statistics
Packets dropped:
Total 1
Lease Time Violation 1
Messages received:
BOOTREQUEST 25
DHCPDECLINE 0
DHCPDISCOVER 10
DHCPINFORM 0
DHCPRELEASE 4
DHCPREQUEST 10
DHCPRENEW 4
DHCPREBIND 2
Messages sent:
BOOTREPLY 20
DHCPOFFER 10
DHCPACK 10
391Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Operational Commands (DHCP and DHCP Relay)