Juniper EX4600

1. Have one person support the weight of the switch while another person uses the screwdriver to
remove the front mounng screws that aach the chassis mounng brackets to the rack or cabinet.
2. Remove the EX4600 switch from the rack or cabinet.
3. Use the screwdriver to remove the mounng screws that aach the mounng blades aached to the
rear of the rack or cabinet.
4. Place the removed screws and mounng blades in a labeled bag. You will need them when you
reinstall the chassis.
5. Transport the EX4600 switch to your desired new locaon.
119