Juniper EX4600

Table 18: Site Preparaon Checklist (Connued)
Item or Task For More Informaon Performed By Date
Cables
Acquire cables and connectors:
• Determine the number of cables
needed based on your planned
conguraon.
• Review the maximum distance
allowed for each cable. Choose the
length of cable based on the distance
between the hardware components
being connected.
"Determining Interface Support
for an EX4600 Switch" on page
57
Plan the cable roung and management.
RELATED DOCUMENTATION
General Safety Guidelines and Warnings
General Site Guidelines
Installing and Connecng an EX4600 Switch | 71
EX4600 Site Guidelines and Requirements
IN THIS SECTION
Environmental Requirements and Specicaons for EX Series Switches | 44
General Site Guidelines | 50
Site Electrical Wiring Guidelines | 51
Rack Requirements for an EX4600 Switch | 52
43