Juniper EX4600 Hardware Guide

4. Select Install Junos to format the internal ash storage and install the Junos OS on the emergency
boot device onto the internal ash storage.
5. The device copies the soware from the emergency boot device, occasionally displaying status
messages. Copying the soware can take up to 12 minutes.
When the soware is nished being copied from the emergency device to the device, the device
then reboots from the internal ash storage on which the soware was just installed. When the
reboot is complete, the device displays the Junos OS login prompt:
root@device#
6. Create a new conguraon as you did when the switch was shipped from the factory, or restore the
previously saved conguraon le to the device.
7. Remove the emergency boot device.
126

Juniper EX4600 Specifications

General

Rack Units	1U
Junos OS	Yes
Product Series	EX Series
DRAM	8 GB
Flash Memory	16 GB
Ports	4 x 40GbE QSFP+ ports
Power Supply	Dual, hot-swappable
MAC Address Table Size	288, 000
Jumbo Frames	9216 bytes
Input Voltage	100-240 V AC
Operating Temperature	0°C to 40°C
Memory	8 GB
Storage	16 GB