Juniper EX4600 Hardware Guide

Unpacking and Mounng an EX4600 Switch | 71
Installing and Connecng an EX4600 Switch | 71
Unpacking an EX4600 Switch | 72
Mounng an EX4600 Switch in a Rack or Cabinet | 73
Before You Begin Rack Installaon | 74
Four Post Procedure | 75
Connecng the EX4600 to Power | 77
Connecng Earth Ground to an EX4600 Switch | 77
Connecng AC Power to an EX4600 Switch | 79
Connecng DC Power to an EX4600 Switch | 81
Connecng the EX4600 to Management Devices | 87
Connect a Device to a Network for Out-of-Band Management | 87
Connect a Device to a Management Console Using an RJ-45 Connector | 88
Connecng EX4600 Switches in a Virtual Chassis | 89
Conguring Junos OS on the EX4600 | 91
4
Maintaining Components
Maintaining the EX4600 Switch Cooling System | 95
Removing a Fan Module from an EX4600 Switch | 95
Installing a Fan Module in an EX4600 Switch | 96
Maintaining the EX4600 Switch Power System | 98
Removing a Power Supply from an EX4600 Switch | 98
Installing a Power Supply in an EX4600 Switch | 100
Maintaining the Expansion Module in an EX4600 Switch | 102
Removing an Expansion Module from an EX4600 Switch | 102
Installing an Expansion Module in an EX4600 Switch | 104
Maintain Transceivers | 106
Remove a Transceiver | 106
v

Juniper EX4600 Specifications

General

Rack Units	1U
Junos OS	Yes
Product Series	EX Series
DRAM	8 GB
Flash Memory	16 GB
Ports	4 x 40GbE QSFP+ ports
Power Supply	Dual, hot-swappable
MAC Address Table Size	288, 000
Jumbo Frames	9216 bytes
Input Voltage	100-240 V AC
Operating Temperature	0°C to 40°C
Memory	8 GB
Storage	16 GB