WARNING:
Translation from Japanese: The attached powercable is only for this product.
Do not use the cable for another product.
NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). The cords supplied with the router are in
compliance.
Table 54 on page 94 provides specifications and Figure 26 on page 95 depicts the plug
on the AC power cord provided for each country or region.
Table 54: AC Power Cord Specifications
Plug TypeElectrical SpecificationModel NumberCountry
SAA/3240 VAC, 50 Hz ACCBL-M-PWR-RA-AUAustralia
PSB-10220 VAC, 50 Hz ACCBL-M-PWR-RA-CHChina
CEE 7/7220 or 230 VAC, 50 Hz ACCBL-M-PWR-RA-EUEurope (except Denmark,
Italy, Switzerland, and
United Kingdom)
CEI 23-16/VII230 VAC, 50 Hz ACCBL-M-PWR-RA-ITItaly
JIS 8303
Two required
125 VAC, 50 or 60 Hz ACCBL-PWR-RA-JP15Japan
NEMA L6-20P
One required
220 VAC, 50 or 60 Hz ACCBL-M-PWR-RA-JP
NEMA 5-15P
Two required
120 VAC, 60 Hz ACCBL-PWR-RA-US15North America
NEMA L6-20P
One required
250 VAC, 60 Hz ACCBL-M-PWR-RA-TWLK-US
Copyright © 2018, Juniper Networks, Inc.94
M120 Multiservice Edge Router Hardware Guide
To Next Page
Loading...
