12. Securely tape the box closed or place the crate cover over the router.
13. Write the RMA number on the exterior of the box to ensure proper tracking.
Related
Documentation
Tools and Parts Required to Remove Components from an M120 Router on page 306•
• Displaying M120 Router Components and Serial Numbers on page 297
• Contacting Customer Support on page 295
• Guidelines for Packing M120 Components for Shipment on page 308
Guidelines for Packing M120 Components for Shipment
To pack and ship individual components:
•
When you return components, make sure they are adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
•
Use the original shipping materials if they are available.
•
Place individual components in antistatic bags.
•
Write the RMA number on the exterior of the box to ensure proper tracking.
CAUTION: Do not stack any of the hardware components.
Related
Documentation
• Packing the M120 Router for Shipment on page 306
• Displaying M120 Router Components and Serial Numbers on page 297
• Contacting Customer Support on page 295
• Packing the M120 Router for Shipment on page 306
Copyright © 2018, Juniper Networks, Inc.308
M120 Multiservice Edge Router Hardware Guide
To Next Page
Loading...
