Juniper M120 User Manual

Table 34: T4000 Routing Engines
Internal Ethernet
Interface
Management
Ethernet
Interface
First Supported 64-bit Junos OS
Release
Name in CLI
OutputModel Number
bcm0
em1
em0Standalone T4000 router: 12.1
T4000 router in a routing matrix: 13.1
RE-DUO-1800RE-DUO-C1800-8G
bcm0
em1
em0Standalone T4000 router: 12.1R2
T4000 router in a routing matrix: 13.1
RE-DUO-1800RE-DUO-C1800-16G
The T4000 router supports the CB-LCC control board.
TX Matrix Routing Engines
Table 35 on page 46 lists the Routing Engines supported by the TX Matrix router.
Table 35: TX Matrix Routing Engines
Internal
Ethernet
Interface
Management
Ethernet
Interface
First
Supported
64-bit Junos
OS Release
First
Supported
32-bit Junos
OS Release
Name in CLI
OutputModel Number
fxp1
fxp2
fxp0–7.0RE-3.0 or RE-3.0
(RE-600)
RE-600-2048 (EOL
details: TSB14373)
fxp1
fxp2
fxp0–7.0RE-4.0 (RE-1600)RE-1600-2048 (EOL
details: TSB14374
em0
bcm0
fxp0–8.5RE-A-2000RE-A-2000-4096
bcm0
em1
em011.4R911.4R9RE-DUO-1800RE-DUO-C1800-8G
bcm0
em1
em011.4R911.4R9RE-DUO-1800RE-DUO-C1800-16G
The TXP router supports two control boards, CB-TX and CB-LCC. The CB-LCC is required
for both RE-DUO-C1800-8G and RE-DUO-C1800-16G Routing Engines.
TX Matrix Plus Routing Engines
Table 36 on page 47 lists the Routing Engines supported by the TX Matrix Plus router.
Copyright © 2018, Juniper Networks, Inc.46
M120 Multiservice Edge Router Hardware Guide

Juniper M120 Specifications

General

Operating System	JUNOS
Routing Protocols	BGP, OSPF, RIP, IS-IS
Power Supply	AC or DC
Slots	8
Interfaces	Ethernet