Juniper M120 - Supported Routing Engines by Router

On routers that accept two Routing Engines, you cannot mix Routing Engine types except
for a brief period (one minute or so) during an upgrade or downgrade to two Routing
Engines of the same type.
Related
Documentation
Supported Routing Engines by Router on page 33•
Supported Routing Engines by Router
The following tables list the Routing Engines that each router supports, the first supported
release for the Routing Engine in the specified router, the management Ethernet interface,
and the internal Ethernet interfaces for each Routing Engine.
•
M7i Routing Engines on page 34
•
M10i Routing Engines on page 34
•
M40e Routing Engines on page 34
•
M120 Routing Engines on page 35
•
M320 Routing Engines on page 35
•
MX5, MX10, MX40, and MX80 Routing Engine on page 36
•
MX104 Routing Engines on page 36
•
MX240 Routing Engines on page 37
•
MX480 Routing Engines on page 38
•
MX960 Routing Engines on page 39
•
MX2008 Routing Engines on page 39
•
MX2010 Routing Engines on page 40
•
MX2020 Supported Routing Engines on page 40
•
MX10003 Routing Engines on page 41
•
PTX1000 Routing Engines on page 41
•
PTX3000 Routing Engines on page 42
•
PTX5000 Routing Engines on page 42
•
PTX10008 and PTX10016 Routing Engines on page 43
•
T320 Routing Engines on page 43
•
T640 Routing Engines on page 44
•
T1600 Routing Engines on page 45
•
T4000 Routing Engines on page 45
•
TX Matrix Routing Engines on page 46
•
TX Matrix Plus Routing Engines on page 46
•
TX Matrix Plus (with 3D SIBs) Routing Engines on page 47
33Copyright © 2018, Juniper Networks, Inc.
Chapter 5: Host Subsystem Components and Descriptions