CHAPTER 17
Installing the M120 With a Mechanical Lift
•
Tools Required to Install the M120 Router Using a Mechanical Lift on page 125
•
Installing the M120 Router Using a Mechanical Lift on page 125
Tools Required to Install the M120 Router Using a Mechanical Lift
To install the router, you need the following tools:
•
Mechanical lift
•
Phillips (+) screwdrivers, number 2
Related
Documentation
M120 Router Chassis Description on page 7•
• M120 Router Installation Summary on page 111
• M120 Chassis Lifting Guidelines on page 321
• General Safety Warnings for Juniper Networks Devices on page 314
Installing the M120 Router Using a Mechanical Lift
Because of the router's size and weight—up to 225 lb (102.1 kg) depending on the
configuration—we strongly recommend you install the router using a mechanical lift. If
you do not use a lift to install the router, refer to “Installing the M120 Router Without
Using a Mechanical Lift” on page 139 for complete instructions to safely install the router.
Before installing the router:
1. Read the safety information in “M120 Chassis Lifting Guidelines” on page 321.
2. Prepare your site and review the guidelines in “M120 Site Preparation Checklist” on
page 81.
125Copyright © 2018, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
