Juniper M120 - Table 64: Accessory Box Parts List

Table 63: Parts List for a Fully Configured M120 Router (continued)
QuantityComponent
Up to sixteen Type 1 PICs
Up to sixteen Type 2 PICs
Up to four Type 3 PICs
PICs
Up to 6FEBs
1 or 2Routing Engines
1 or 2CBs
1 or 2Power supplies
2Front fan tray
2Rear fan tray
1Front air filter
1Quick Start installation instructions
1Large mounting shelf
1Small mounting shelf
2Spacer bars
One blank panel for each slot not
occupied by a component
Blank panels for slots without components installed
Table 64: Accessory Box Parts List
QuantityPart
14Screws to mount chassis
2Screws, Pan hd, Phil, 1/4-20 x .50, Steel, Zinc Plated
2Split washers, 1/4, Steel, Zinc Plated
5Terminal lugs, 6-AWG, for grounding and DC power
1DB-9 (male) to DB-25 (female) serial adapter
1Serial cable, with RJ-45 jack to female DB-9, to connect
the router through the serial port
Copyright © 2018, Juniper Networks, Inc.116
M120 Multiservice Edge Router Hardware Guide