CHAPTER 14
Installation Overview
•
M120 Router Installation Summary on page 111
M120 Router Installation Summary
To install the M120 router:
1. Prepare your installation site.
See “M120 Site Preparation Checklist” on page 81.
2. Review the safety guidelines.
See “General Laser Safety Guidelines for the M120 Router” on page 329.
3. Unpack the router and verify the parts.
•
Unpacking the M120 Router on page 113
•
Verifying M120 Parts Received on page 115
4. Install the mounting hardware.
•
Installing the Mounting Hardware for a Front-Mount Four-Post Rack or Cabinet on
page 119
•
Installing the Mounting Hardware for a Front-Mount Open-Frame Rack on page 121
•
Installing the Mounting Hardware for a Center-Mount Open-Frame Rack on page 123
5. Install the router.
•
Installing the M120 Router Using a Mechanical Lift on page 125
•
Installing the M120 Router Without Using a Mechanical Lift on page 139
6. Connect cables to the network and external devices.
See “Connecting the M120 Router to Management and Alarm Devices” on page 153.
7. Connect the grounding cable.
See “Connecting the Grounding Cable to the M120 Router” on page 151.
111Copyright © 2018, Juniper Networks, Inc.
To Next Page
Loading...
