Juniper M120 - Replacing an SSD Drive on an RE-A-1800 or RE-S-1800; Figure 70: Installing an M120 Routing Engine

lights steadily, the Routing Engine is not functioning properly. Contact your customer
support representative.
To check the status of the Routing Engine, use the CLI command:
user@host> show chassis routing-engine
Routing Engine status: Slot 0: Current state Master
...
For more information about using the CLI, see the Junos OS documentation.
Figure 70: Installing an M120 Routing Engine
See Also M120 Routing Engine Description on page 22•
• M120 Routing Engine Interface Ports and Status Indicators on page 28
Related
Documentation
M120 Routing Engine Description on page 22•
• M120 Routing Engine Interface Ports and Status Indicators on page 28
• Synchronizing Routing Engines
Replacing an SSD Drive on an RE-A-1800 or RE-S-1800
Each RE-1800 Routing Engine supports two solid-state drives (SSD) specified by Juniper
Networks. The RE-1800 ships with one SSD installed. The spare SSD is Juniper part
number RE-SSD-32G-UPG.Figure 71 on page 199 and Figure 72 on page 199show the
arrangement of storage drive slots on a RE-1800 Routing Engine.
Copyright © 2018, Juniper Networks, Inc.198
M120 Multiservice Edge Router Hardware Guide