}
}
16. Commit the configuration to activate it on the router.
[edit]
root@# commit
17. (Optional) Configure additional properties by adding the necessary configuration
statements. Then commit the changes to activate them on the router.
[edit]
root@host# commit
18. When you have finished configuring the router, exit configuration mode.
[edit]
root@host# exit
root@host>
NOTE: To reinstall Junos OS, you boot the router from the removable media.
Do not insert the removable media during normal operations. The router does
not operate normally when it is booted from the removable media.
When the router boots from the storage media (removable media, CompactFlash card,
or hard disk) it expands its search in the /config directory of the routing platform for the
following files in the following order: juniper.conf (the main configuration file), rescue.conf
(the rescue configuration file), and juniper.conf.1 (the first rollback configuration file).
When the search finds the first configuration file that can be loaded properly, the file
loads and the search ends. If none of the file can be loaded properly, the routing platform
does not function properly. If the router boots from an alternate boot device, Junos OS
displays a message indication this when you log in to the router.
Related
Documentation
• M120 Router Description on page 3
• M120 Router Physical Specifications on page 82
Copyright © 2018, Juniper Networks, Inc.176
M120 Multiservice Edge Router Hardware Guide
To Next Page
Loading...
