Juniper M120 - Page 378

•
FCC Part 15 Class A (USA)
•
VCCI Class A (Japan)
•
Immunity
•
EN-61000-3-2 Power Line Harmonics
•
EN-61000-3-3 Voltage Fluctuations and Flicker
•
EN-61000-4-2 ESD
•
EN-61000-4-3 Radiated Immunity
•
EN-61000-4-4 EFT
•
EN-61000-4-5 Surge
•
EN-61000-4-6 Low Frequency Common Immunity
•
EN-61000-4-11 Voltage Dips and Sags
•
ETSI
•
ETSI EN-300386-2 Telecommunication Network Equipment. Electromagnetic
Compatibility Requirements
The router is designed to comply with the following standards:
•
NEBS
•
GR-1089-Core: EMC and Electrical Safety for Network Telecommunications
Equipment
•
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
•
GR-63-Core: NEBS, Physical Protection
•
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
•
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
•
The battery return connection is to be treated as a Common DC return (i.e. DC-C),
as defined in GR-1089-CORE.
Related
Documentation
Compliance Statements for EMC Requirements for Juniper Networks Devices (United
States) on page 354
•
• Compliance Statements for EMC Requirements for Juniper Networks Devices (Japan)
on page 354
• Compliance Statements for EMC Requirements for Juniper Networks Devices (Canada)
on page 353
Copyright © 2018, Juniper Networks, Inc.352
M120 Multiservice Edge Router Hardware Guide