Juniper SRX300 Series - Connector to DB-15 Connector Pinouts for the 1-Port T1;E1 Mini-Physical Interface Module (SRX-MP-1 T1 E1-R)

Table 29: RJ-48 Connector to RJ-48 Connector (Straight) Pinouts (continued)
Signal
RJ-48 Pin (Data Numbering
Form)
RJ-48 Pin (on 1-Port T1/E1
Mini-PIM)
No connectNo connect7
No connectNo connect8
Table 30 on page 52 lists the RJ-48 connector to RJ-48 connector (crossover) pinouts for the 1-Port T1/E1
Mini-Physical Interface Module (Mini-PIM).
Table 30: RJ-48 Connector to RJ-48 Connector (Crossover) Pinouts
Signal
RJ-48 Pin (Data Numbering
Form)
RJ-48 Pin (on T1/E1
Mini-PIM)
RX/Ring/– <––>TX/Ring/–41
RX/Tip/+ <––>TX/Tip/+52
TX/Ring/– <––>RX/Ring/–14
TX/Tip/+ <––>RX/Tip/+25
Shield/Return/Ground33
Shield/Return/Ground66
No connectNo connect7
No connectNo connect8
RJ-48 Connector to DB-15 Connector Pinouts for the 1-Port T1/E1 Mini-Physical Interface
Module (SRX-MP-1T1E1-R)
Table 31 on page 52 lists the RJ-48 connector to DB-15 connector (straight) pinouts.
Table 31: RJ-48 Connector to DB-15 Connector (Straight) Pinouts
Signal
DB-15 Pin (Data Numbering
Form)RJ-48 Pin (on T1/E1 Mini-PIM)
RX/Ring/– <––>RX/Ring/–111
52