Juniper SRX300 Series Reference Guide

LTE Mini-Physical Interface Module LEDs
Figure 11 on page 79 shows the LEDs on the LTE Mini-PIM.
Figure 11: LTE Mini-PIM LEDs
g009650
Table 49 on page 79 lists the LEDs on the LTE Mini-PIM and their indications.
Table 49: LTE Mini-PIM LED States
DescriptionLED
Solid green (one bar)—Low signal strength (<= –99 dBm).SIG (Received Signal Strength Indicator)
Solid green (two bars)—Low signal strength
(from –98 dBm to –87 dBm).
Solid green (three bars)—Low signal strength
(from –86 dBm to –76 dBm).
Solid green (four bars)—High signal strength (>= –75 dBm).
Unlit—No signal
Solid green—3G connection is established.3G
Blinking green—Connecting to a 3G network.
Solid green—LTE connection is established.LTE
Blinking green—Connecting to an LTE network.
Solid green—SIM1 is active.SIM1
Solid green—SIM2 is active.SIM2
79

Juniper SRX300 Series Specifications

General

Memory	4 GB
CPU	Intel Atom
Storage	8 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	10% to 90% noncondensing