Juniper SRX300 Series - Page 7

Maintaining Interface Modules
2
Maintaining the SRX Series Interface Modules | 129
Required Tools and Parts for Replacing Interface Modules | 129
Preventing Electrostatic Discharge Damage to the SRX300 Series and SRX550 High Memory
Services Gateway | 130
Replacing Mini-Physical Interface Modules on the SRX300 Series and SRX550 High Memory
Services Gateways | 131
Removing a Mini-Physical Interface Module | 131
Installing a Mini-Physical Interface Module | 132
Removing a Blank Mini-Physical Interface Module Faceplate | 133
Installing a Blank Mini-Physical Interface Module Faceplate | 133
Replacing Gigabit-Backplane Physical Interface Modules on the SRX300 Series and SRX550
High Memory Services Gateways | 134
Removing a Gigabit-Backplane Physical Interface Module | 134
Installing a Gigabit-Backplane Physical Interface Module | 135
Removing a Blank Gigabit-Backplane Physical Interface Module Faceplate | 137
Installing a Blank Gigabit-Backplane Physical Interface Module Faceplate | 137
Contacting Customer Support and Returning the Module
3
Returning the SRX Series Modules | 141
Contacting Customer Support | 141
Return Procedure for SRX Series Services Gateway Hardware Components | 142
Locating the SRX Series Services Gateway Hardware Component Mini-PIM or GPIM Serial
Number Label | 143
SRX Series Services Gateway Mini-PIM Serial Number Label | 143
SRX Series Services Gateway GPIM Serial Number Label | 143
Required Tools and Parts for Packing the SRX Series Services Gateway Hardware
Components | 144
Packing the SRX Series Services Gateway Hardware Components for Shipment | 144
Packing the Hardware Components for Shipment | 144
vii