K-Patents PR-23 - 9.4 Sanitary Probe Refractometer PR-23-AP

90
PR-23 instrucon manual
K-Patents offers a 3A Sanitary Standard Accepted repair and maintenance package in
which all wetted parts, prism, gaskets and dryer are replaced. Note that this repair
service can be completed only by a 3A authorized service center (K-Patents factory or
regional headquarters).
9.4 Sanitary probe refractometer PR-23-AP
The K-Patents Sanitary probe refractometer PR-23-AP provides an accurate on-line
BRIX measurement in cookers and tanks.
9.4.1 PR-23-AP model code
SANITARY PROBE REFRACTOMETER for large pipelines and vessels
Model and descripon Model
PR-23 = Sensor PR-23
Sensor model
-A = 3A approved -A
Sensor type
P = Probe type for tank and large pipeline installaon P
Refracve Index range limits
-62 = R.I. 1.320–1-530 n
D
(0-100 Brix) Spinel prism -62
-73 = R.I. 1.320–1.530 n
D
(0-100 Brix) Sapphire prism -73
-74 = R.I. 1.260–1.470 n
D
Sapphire prism (A) -74
Process connecon
-T = Sanitary 3A-clamp, 2½ inch, inseron length 170 mm (B) -T
-N = Sanitary 3A-clamp, 2½ inch, inseron length 14 mm, high pressure, 40 bar at 20°C (B) -N
-I = Sanitary 3A-clamp, 2½ inch, inseron length 42 mm (B) -I
-R = Sanitary 3A-clamp, 4 inch, inseron length 170 mm (B) -R
-S = Sanitary 3A-clamp, 4 inch, inseron length 63 mm (B) -S
-P = MT4 DN 25/1T APV Tank boom ange, ush mounted (C) -P
-B = MT4 DN25/1T APV Tank boom ange, inseron length 170 mm (D) -B
-V = Sanitary 3A-clamp, 2½ inch, inseron length 170 mm (E) -V
-H = Sanitary 3A-clamp, 2½ inch, inseron length 14 mm (B) -H
-Q = Sanitary 3A-clamp, 2½ inch for ush-mount adaptor, inseron length 140 mm (D) -Q
-C = Varivent® in-line access unit clamp DN 65, inseron length 170 mm (B) -C
-ZP = Sanitary I-line male (14 WI) 2½ inch, inseron length 178 mm (C) -ZP
Sensor weed parts material
SS = AISI 316 L SS