K-Patents PR-23 - Model Code; Transmitter Model Code; Interconnecting Cable Model Code

10 Indicang transmier DTR specicaons
149
10.2 Model code
10.2.1 Transmier model code
MODEL AND DESCRIPTION MODEL
DTR = Indicang transmier (connecvity for two sensors) DTR
STR = Indicang transmier (connecvity for one -IA/-IF sensor) STR
Cable connecon
-U = ½ inch NPT type conduit hubs for CSA cered Transmier -U
-M = M20x1.5 metric cable glands for general purpose Transmier -M
Electrical classicaon
-GP = General purpose -GP
-CS = CSA cered for use in general purpose (ordinary) locaons -CS
Applicable to CSA and ANSI/UL standards (A)
Power supply
-AC = Power supply 100-240 VAC 50/60 Hz -AC
-DC = Power supply 24 V DC (B) -DC
(A) Available only with cable connecon code -U, ½ NPT type conduit hubs and -AC power supply
(B) With -GP opon only
Table 10.1 DTR model code
10.2.2 Interconnecng cable model code
PART NUMBER AND DESCRIPTION PART NO.
PR-8230 = Interconnecng cable between transmier and sensor PR-8230
Cable length
-010 = 10 meters (33 feet), standard length -010
-_ _ _ = Specify cable length in meters with 10 meter increments. -_ _ _
Max. length is 200 meters (660 feet)
Table 10.2 Interconnecng cable model code