100
PR-23 instrucon manual
9.5.2 PR-23-GC specicaons
General speciications
Refractive Index range: Full range n
D
1.3200–1.5300 (corresponds to
0–100 % b.w.), Sapphire prism
Accuracy: Refractive index n
D
± 0.0002 (corresponds typ-
ically to ± 0.1 % by weight)
Repeatability and stability correspond to accu-
racy
Speed of response: 1 s undamped, damping time selectable up to
5 min
Calibration: With Cargille certiied refractive index liquids
over full range of n
D
1.3200–1.5300
CORE-Optics: No mechanical adjustments (US Patent No. US6067151)
Digital measurement: 3648 pixel CCD element
Light source: Light emitting diode (LED) 589 nm wavelength,
sodium light
Temperature sensor: Built-in Pt-1000
Temperature compensation: Automatic, digital compensation
Instrument veriication: With certiied refractive index liquids and
K-Patents documented procedure
Ambient temperature: Sensor: max. 45 °C (113 °F),
min. -20 °C (-4 °F)
Indicating transmitter: max. 50 °C (122 °F),
min. 0 °C (32 °F)
SENSOR PR-23-GC:
Process connection by Sandvik coupling L 76.1 mm (2.5 inch) for
(in upper elbow of pipe): pipe line sizes of 2.5 inch and larger; via reduc-
ing ferrule PR-9283 for 2 inch pipes
Wafer low cell WFC connection via Wafer low cell WFC for pipe line sizes 15 mm
(in straight pipe): (0.5 inch), 25 mm (1 inch) and 40 mm (1.5 inch);
Wafer low cell body mounts between ANSI 150 psi,
DIN PN 25 or JIS
Pipe low cell PFC connection via a Pipe low cell PFC for pipe line sizes 15 mm
(in straight pipe) (0.5 inch), 25 mm (1 inch) and 40 mm (1.5 inch);
Pipe low process connection ANSI 150 psi, DIN
PN 25 or JIS
Process pressure: up to 15 bar (200 psi) at 20 °C (70 °F)
Process temperature: -40 °C–+130 °C (-40 °F–+266 °F)
Process wetted parts, standard: AISI 316L stainless steel, prism sapphire, prism
gaskets PTFE (telon)
Process wetted parts, options: AISI 904L stainless steel, Alloy 20, Hastelloy
C-276, Nickel 200, Titanium ASTM B348 or SAF
2205
Sensor protection class: IP67, Nema 4X
Sensor weight: 2.0 kg (4.4 lbs)
To Next Page
Loading...
