KEB F6 User Manual

Parameter Descriptions
142
© 2024 KEB America, Inc.
LS34 Deceleration Jerk One Floor NTS
Jerk rate out of intermediate speed into deceleration for One Floor Speed profile
(Intermediate Speed 1 or 2), or when NTS Slowdown function is activated.
Motor Type
Range
Units
Default
Pass
Level
Ind.
PM
Min.
Max.
Imp.
Met.
RW
RW
0.09
9.8
-
m/s^3
0.9
Basic
0.3
32.0
ft/s^3
-
3.0
LS35 Stop Jerk One Floor NTS
Jerk rate out of deceleration into leveling speed for One Floor Speed profile (Intermediate
Speed 1 or 2), or into TS02 NTSD Target Speed when NTS Slowdown function is
activated.
Motor Type
Range
Units
Default
Pass
Level
Ind.
PM
Min.
Max.
Imp.
Met.
RW
RW
0.09
9.8
-
m/s^3
0.9
Basic
0.3
32.0
ft/s^3
-
3.0
LS37 Intermediate Speed 1 Correction
The amount of leveling distance to be eliminated from run at Intermediate Speed 1.
 Refer to parameter LS27 for further description.
Motor Type
Range
Units
Default
Pass
Level
Ind.
PM
Min.
Max.
Imp.
Met.
RW
RW
0
15.2
-
cm
0
Basic
0
6.00
in
-
0
LS38 Intermediate Speed 2 Correction
The amount of leveling distance to be eliminated from run at Intermediate Speed 2.
 Refer to parameter LS27 for further description.
Motor Type
Range
Units
Default
Pass
Level
Ind.
PM
Min.
Max.
Imp.
Met.
RW
RW
0
15.2
-
cm
0
Basic
0
6.00
in
-
0

KEB F6 Specifications

General

Category	Inverter
Protection Class	IP20
Communication Interfaces	PROFIBUS, CANopen, RS485
Operating Temperature	-10°C to +50°C
Series	F6
Output Frequency	0 Hz to 600 Hz
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit
Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000 m above sea level
Control Modes	Sensorless vector control
Storage Temperature	-25°C to +70°C