Keithley 2002 User Manual

IEEE-488 Reference
3-64
:ARM[:SEQuence[1]]
[:LAYer[1]]
:IMMediate
:COUNt <n>
:COUNt?
:SOURce <name>
:SOURce?
:SIGNal
:TCONfigure
:DIRection <name>
:DIRection?
:ASYNchronous
:ILINe <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
:RTCLock
:DATE <yr>, <mo>, <day>
:DATE?
:TIME <hr>, <min>, <sec>
:TIME?
:LAYer2
:IMMediate
:COUNt <n>
:COUNt?
:DELay <n>
:DELay?
:SOURce <name>
:SOURce?
:TIMer <n>
:TIMer?
:SIGNal
:TCONfigure
:DIRection <name>
:DIRection?
:ASYNchronous
:ILINe <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
:TRIGger[:SEQuence[1]]
:IMMediate
:COUNt <n>
:COUNt?
:DELay <n>
:DELay?
:SOURce <name>
:SOURce?
Path to configure arm layers:
Path to program Arm Layer 1:
Loop around control source.
Specify arm count (1 to 99999, or INF).
Query arm count.
Select control source (HOLD, IMMediate, RTCLock,
MANual, BUS, TLINk or EXTernal).
Query control source.
Loop around control source.
Path to configure Triggers:
Enable (SOURce) or disable (ACCeptor).
Query direction.
Path to configure asynchronous Trigger Link:
Select input line (1 to 6).
Query input line.
Select output line (1 to 6).
Query output line.
Path to configure the RTCLock control source:
Specify the date for the clock event.
Query the date for the clock event.
Specify the time for the clock event.
Query the time for the clock event.
Path to program Arm Layer 2:
Loop around control source.
Specify scan count (1 to 99999 or INF).
Query scan count.
Program delay (0 to 999999.999 sec).
Query delay.
Select control source (HOLD, IMMediate, TIMer,
MANual, BUS, TLINk or EXTernal).
Query control source.
Set timer interval (0.001 to 999999.999 sec).
Query timer.
Loop around control source.
Path to configure Triggers:
Enable (SOURce) or disable (ACCeptor) Bypass.
Query direction.
Path to configure asynchronous Trigger Link:
Select input line (1 to 6).
Query input line.
Select output line (1 to 6).
Query output line.
Path to program Trigger Layer:
Loop around control source.
Set measure count (1 to 99999, or INF).
Query measure count.
Set delay (0 to 999999.999 sec).
Query delay.
Select control source (HOLD, IMMediate, TIMer,
MANual, BUS, TLINk or EXTernal).
Query control source.
1
IMMediate
ACCeptor
2
1
(Note 3)
0
IMMediate
1
ACCeptor
2
1
(Note 3)
0
IMMediate
√
√
√
√
√
(Note 2)
√
√
√
√
√
√
√
√
(Note 2)
√
√
√
√
√
√
√
√
√
√
(Note 2)
√
3.23.3
3.23.4
3.23.6
3.23.8
3.23.9
3.23.10
3.23.3
3.23.4
3.23.5
3.23.6
3.23.7
3.23.8
3.23.9
3.23.3
3.23.4
3.23.5
3.23.6
Table 3-15 (Continued)
Trigger command summary
Command Description
Default
parameter SCPI Ref.

Keithley 2002 Specifications

General

Resolution	8.5 digits
DC Voltage Accuracy	±0.0006%
Maximum DC Voltage	1000 V
Maximum AC Voltage	750 V
Maximum DC Current	3 A
Maximum AC Current	3 A
Connectivity	GPIB, RS-232
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	10 Ω to 1 GΩ
Model	2002
Category	Multimeter
Interface	GPIB, RS-232
AC Current Accuracy	±0.1%
Frequency Range	0.1Hz to 300kHz
Display	VFD
Type	Digital
Power Supply	100-240V AC, 50/60Hz
Current Range (DC)	100 μA to 3 A
Current Accuracy (DC)	±0.01%
Current Range (AC)	100 μA to 3 A
Current Accuracy (AC)	±0.1%
DC Current Range	100 μA to 3 A
AC Current Range	100 μA to 3 A