Keyscan CA150 - Figure 16 - Terminate Input Wiring - RTE PIR Motion Sensor

Keyscan Inc. A Member of the Kaba Group – CA150 Rev. B Installation Guide (07.15)
31
Figure 16 – Terminate Input Wiring – RTE PIR Motion Sensor
to RTE +
1K
Single end of line supervision
Normally Open
S2.8 = OFF
S2.7 = ON
3K
Non-supervised
Normally Open
S2.8 = OFF
S2.7 = OFF
Lens
NO
COM
PIR (Request To Exit)
Lens
NO
COM
Lens
NOCOM
NO = Normally Open
PIR
RTE (Request to Exit) – ½ second pulse
Determines the amount of time the output relays will energize when motion is detected.
Cut View of CA150B
DOOR
RTE AUX1 AUX2
-
+
-
+
-
+
-
+
to RTE -
Double end of line supervision
Normally Open
S2.8 = ON
S2.7 = ON
to RTE +
1K
to RTE -
KI-00335E-02-14
S2.7 and S2.8 set the
supervision type universally.
The jumper setting affects
the Door Input, RTE Input,
and AUX Inputs.
S2
RDR/SUPV. CONFIG.
ON
6
7
8
9
10
2
3
4
5
1