Need help?Do you have a question about the Keyscan EC2500 Series and is the answer not in the manual?
General| Model | EC2500 Series |
|---|---|
| Housing Material | Metal |
| Communication | TCP/IP, RS-485 |
| Operating Voltage | 12 VDC |
| Transaction Buffer | 50, 000 events |
Instructions for terminating reader, lock, input, and output wiring at the ACU.
Procedure for powering up the system and verifying voltages.
Diagrams showing mounting positions for various control boards.
Wiring diagrams for various reader types.
Specifications for OCB-8 relay board and lock wiring procedures.
Explanation of relay status LEDs and fail safe/secure lock device connections.
Wiring assignments for elevator control boards and OCB-8.
Diagrams for terminating floor input wiring for EC1500/EC2500.
Detailed wiring instructions for various readers to the ACU.
Procedure to reset the control board to factory defaults.
Details on DPS-15 power supply and current calculation tables.
Guidelines for initial power-up of the control board.
Correct voltages for control board test points.
Correct voltages for communication terminals on various boards.
Interpreting communication status LEDs for troubleshooting.
Understanding the multi-color system status LED.
Power requirements for Keyscan and HID readers.
Power requirements for Indala proximity readers.
Procedure to set IP addresses for reverse network communication.
Keyscan's warranty terms for product defects in materials and workmanship.
To Next Page
