Keyscan CA150 User Manual

Keyscan Inc. A Member of the Kaba Group – CA150 Rev. B Installation Guide (07.15)
109
CA150B Specifications
The CA150 is designed as a single, stand-alone control unit; it does not support CIM, CB-485 or CPB-10-2
connections to other control units. The CA150 does not support global functions. The table below outlines
CA150B specifications.
Table 18 - CA150B Specifications
Specification
Measurements/Standards
Dimensions
W - 6.875 “ (17.46 cm) x H – 7.625 “ (19.37 cm) x D – 1.75 “ (4.45 cm)
Housing
22 GA steel, black powder coat
Environmental
Operating Temperature: 32
0
F to 120
0
F (0
0
C to 49
0
C)
Humidity: 0 % to 90 % R.H, non-condensing
Power Inputs
PoE (Class 0)
+12V DC independent power supply
CA150 Current
170 mA to maximum 200 mA
Communication
Ethernet (TCP/IP)
RS-232
PTC Resettable Fuses
Reader port 1 – 500 mA
Reader port 2 – 500 mA
Door output – 500 mA
Aux/Accessibility output – 500 mA
RTE port – 300 mA
Maximum current for all connected devices with PoE is 680 mA.
PoE
IEEE 802.3af
Class 0
Software Requirements
Aurora – 1.0.1.0 or higher
System VII – 7.0.14 or higher
Vantage – 8.1.13 or higher
NETCOM Program Utility – version 6.0.18 or higher for programming on-board
Ethernet module for network communication
Cable
RS-232 – 5 conductor 22 AWG shielded cable - maximum 20 ft (6m)
PoE – CAT 5 or CAT 6 – maximum 328 ft (100 m)
Applications
Indoor installations only

Keyscan CA150 Specifications

General

Brand	Keyscan
Model	CA150
Category	Control Unit
Language	English