Keyscan CA150 User Manual

Keyscan Inc. A Member of the Kaba Group – CA150 Rev. B Installation Guide (07.15)
90
Figure 60 – Indala PX 620 Wiring
Important
Do not mount an Indala PX 620 reader in an elevator car. The environment is unsuitable and causes the
reader to malfunction.
The PX 620 is factory tuned. If a PX 620 requires tuning, tune only once. Excessive tuning may cause the
reader to permanently malfunction. Refer to the Indala documentation for instructions on tuning.
Shield
ACU Ground Lug
D1 (White)
D0 (Green)
Red
+
VDC
GND (Black 2)
LED (Brown)
CA150 Reader Terminal
LED
D1
WHT
D0
GRN
PWR
RED
GND
BLK
C1
(BEEP)
Black 1
Black
to separate
power
supply
Brown White Green Red Black 1 & 2
Shield
PX 620
24 VDC
6 conductors shielded 18 AWG
Maximum - 500 ft (152.4 m)
KI-00375E-07-11

Keyscan CA150 Specifications

General

Brand	Keyscan
Model	CA150
Category	Control Unit
Language	English