Keysight B2900 User’s Guide, Edition 5 3-5
Installation
Inspecting the Shipment
Figure 3-1 Display Example for 1-ch Model
Figure 3-2 Display Example for 2-ch Model
Checking for Errors
Errors can be checked as described below.
1. Press the More > System > Error > Log function keys. This opens the Error Log
dialog box.
2. Check the errors displayed on the dialog box.
If no error is detected, “0, No Error” is displayed.
3. Press the OK softkey to close the dialog box.
To Next Page
Loading...
