Keysight B2900 User’s Guide, Edition 5 2-19
Introduction
Operation and Functions
• Time stamp
• Measurement status
• Source setting
Maximum buffer size: 100000 points/channel
Program and Interface Capabilities
Programming Language
The B2900 supports SCPI (Standard Commands for Programmable Instruments).
• Default command set: Supports all of the advanced features of the B2900.
• Conventional command set: Supports industry standard conventional SCPI
command set for basic compatibility.
Program Memory
Program memory allows you to store long strings of SCPI command lines once into
the built-in volatile memory and then recall those strings multiple times while the
program is executing using a single SCPI command. By storing the command
strings in memory, the time that would have been spent sending those same
commands over a communication bus is eliminated. For tests that utilize lots of
repeated code (such as subroutines), program memory can dramatically reduce test
times.
• Maximum number of characters of program name: 32 with alphabets, numbers,
hyphens, and underscores
• Maximum memory size: 100 KB (2500 lines typical)
LXI
LXI core conformant. The B2900 follows specified LAN protocols and adhere to
LXI requirements such as a built-in Web control server and IVI-COM driver.
• Ethernet: 10/100Base-T
• USB2.0: USB-TMC488 protocol (rear 1)
• GPIB: IEEE-488.2 compliant
USB File System
USB 2.0 high-speed mass storage (MSC) class device (front 1)
To Next Page
Loading...
Need help?
General
