Keysight Technologies B2900 Series User Manual

Keysight B2900 User’s Guide, Edition 5 5-21
Front Panel Operations
To Set Source Output
The Sweep dialog box opens.
2. In the Ch field, set the channel to which the setting change is applied.
3. Set BEST, AUTO, or FIXED in the Sweep Ranging field. For details, see
“Sweep dialog box” on page 4-29.
4. To apply the settings, press Apply.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
To Set Sweep Direction
1. Press the Config > Source > Sweep function keys.
The Sweep dialog box opens.
2. In the Ch field, set the channel to which the setting change is applied.
3. Set UP or DOWN in the Sweep Direction field. For details, see “Sweep dialog
box” on page 4-29.
4. To apply the settings, press Apply.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
To Set Source Output Value after Sweep
1. Press the Config > Source > Sweep function keys.
The Sweep dialog box opens.
2. In the Ch field, set the channel to which the setting change is applied.
3. Set START VALUE or END VALUE in the Output after Sweep field. For
details, see “Sweep dialog box” on page 4-29.
4. To apply the settings, press Apply.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.

Keysight Technologies B2900 Series Specifications

General

Brand	Keysight Technologies
Model	B2900 Series
Category	Measuring Instruments
Language	English