Keysight Technologies B2900 Series User Manual

5-20 Keysight B2900 User’s Guide, Edition 5
Front Panel Operations
To Set Source Output
4. To apply the settings, press Apply.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
To Enable or Disable Automatic Output-On Function
For details on this function, see “Automatic Output-ON/OFF Function” on page
6-14.
1. Press the Config > Source > Connection function keys.
The Output Connection dialog box opens.
2. In the Ch field, set the channel to which the setting change is applied.
3. Set ON (enable) or OFF (disable) in the Auto Output-On field.
4. To apply the settings, press Apply.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
To Enable or Disable Automatic Output-Off Function
For details on this function, see “Automatic Output-ON/OFF Function” on page
6-14.
1. Press the Config > Source > Connection function keys.
The Output Connection dialog box opens.
2. In the Ch field, set the channel to which the setting change is applied.
3. Set ON (enable) or OFF (disable) in the Auto Output-Off field.
4. To apply the settings, press Apply.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
To Set Ranging Mode of the Sweep Source
For details on this function, see “Ranging Mode” on page 6-4.
1. Press the Config > Source > Sweep function keys.

Keysight Technologies B2900 Series Specifications

General

Brand	Keysight Technologies
Model	B2900 Series
Category	Measuring Instruments
Language	English