Keysight Technologies B2900 Series User Manual

3-10 Keysight B2900 User’s Guide, Edition 5
Installation
Installing the Keysight B2900
Rack Installation
NOTE Use the Rack Mount kit (Option 1CM) to rack mount the Keysight B2900.
Keysight B2900 can be mounted in a 19-inch EIA rack cabinet. It is designed to fit
in two rack-units (2U) of space.
Remove the front and rear rubber bumpers and the handle before rack mounting the
B2900.
Do not block the air intake at the sides and the exhaust at the rear of the B2900.
Removing the Bumper
Stretch a corner of the rubber bumper and slide it off.
Removing the Handle
1. Grab the handle by the sides and pull outward. This will allow you to rotate the
handle.
2. Rotate the handle to a vertical position. Then, position the instrument
horizontally.
3. Pull outward and then lift the handle upward.
CAUTION When reattaching the handle, pay attention to its direction. Incorrect attachment
may damage the hardware.
1
1
2
3

Keysight Technologies B2900 Series Specifications

General

Brand	Keysight Technologies
Model	B2900 Series
Category	Measuring Instruments
Language	English