Keysight B2900 User’s Guide, Edition 5 2-21
Introduction
Software and Drivers
Software and Drivers
• Keysight B2900A Quick I/V Measurement Software
The B2900 includes PC-based Keysight B2900A Quick I/V Measurement
Software. This powerful software makes it easy to quickly setup and perform
I/V measurements and to display the measurement data in a table or graph
without the need to perform any programming. The software allows you to
control up to four channels over a GPIB or LAN connection, or one B2900 via a
USB connection.
Operating System: Windows 7 (64 bit/32 bit), XP SP3 (32 bit)
Other requirements: Microsoft .NET framework 4.0 or later and Keysight IO
Libraries 16.0 or later
• Graphical Web Interface
The Graphical Web Interface is a web browser based instrument control panel. It
enables you to set up and perform a measurement easily and quickly from a web
browser using the built-in web server. This allows you to control one B2900
over a LAN connection.
• IVI-C or IVI-COM drivers
Compatible with Windows 7 (64 bit/32 bit), XP SP3 (32 bit) IO Libraries 16.0 or
later. Supports Keysight VEE, Microsoft Visual Studio (Visual Basic, Visual
C++, Visual C#), National Instruments LabWindows and LabVIEW.
• LabVIEW driver (VI)
National Instruments LabVIEW 7.0 or later. LabView drivers are available at
NI.COM.
NOTE For the latest system requirements, go to www.keysight.com/find/b2900a and get
the information.
To Next Page
Loading...
Need help?
General
