5-10 Keysight B2900 User’s Guide, Edition 5
Front Panel Operations
To Use Functions other than Measurement
To Save/Recall All Setup Information
This function saves/recalls all setup information of the B2900. For this function,
five storage areas are available in the built-in non-volatile memory (NVRAM).
To save the setup information, do the following steps.
1. Press the Config > Save function keys.
2. Press a function key #1, #2, #3, #4, or #5 corresponding to the storage area.
To recall the setup information, do the following steps.
1. Press the Config > Recall function keys.
2. Press a function key #1, #2, #3, #4, or #5 corresponding to the storage area
which stores the setup information to recall.
To Enable/Disable Media Transfer Protocol for Easy
File Access
For details on this function, see “File Access Function (Easy File Access)” on page
6-32.
1. Press the More > I/O > USB function keys. The USB Status dialog box opens.
2. Set the Easy File Access field to ON (enable) or OFF (disable).
3. To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
Changing the setting needs rebooting the B2900.
To Enable/Disable the Function to Restore the Trigger
Mode Settings on the Local State
For details on this function, see “Display Preference dialog box” on page 4-51.
1. Press the More > Display > Pref. function keys. The Display Preference dialog
box opens.
2. Set the Restore Trigger Mode on Local field to ON (enable) or OFF (disable).
3. To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
To Next Page
Loading...
Need help?
General
