2-16 Keysight B2900 User’s Guide, Edition 5
Introduction
Operation and Functions
Operation and Functions
Front Panel Interface
4.3” color TFT WQVGA (480272, with LED backlight) provides a graphical user
interface (GUI) with the following features.
• 4-view modes (Single, Dual, Graph, Roll view)
• Easy-to-use key operations
• Easy access to basic and advanced source/measurement capabilities
Single view
Single view provides basic and advanced settings and display capabilities for the
selected channel from the front panel of the instrument. No additional controller or
software is required.
Dual view
Dual view provides the basic settings and display capabilities for both channels 1
and 2. Up to 6½ digits can be displayed in the Dual view mode. This mode is
available only for the B2902A and B2912A.
Graph view
Graph view displays measurement results on XY graphs (such as I-V and I-t/V-t
curves) on up to 2 channels. This is useful for quick evaluation of device
characteristics, especially those obtained from sweep measurements.
Roll view
Roll view draws I-t or V-t curves similar to the curves drawn by a strip chart
recorder. Up to 1000 acquired data points can be displayed and updated while the
measurement is still in progress. Roll view’s continuous measurement capability is
especially useful for monitoring low frequency phenomena. Roll view is available
only for the B2911A and B2912A.
Easy-to-Use Key Operations
• Numeric/alpha keys, assist keys, and rotary knob for easy operation
• Numeric/alpha keys enable direct input of alphanumeric values.
• Assist key guides operation on the front panel.
To Next Page
Loading...
Need help?
General
