Keysight B2900 User’s Guide, Edition 5 4-45
Front Panel Reference
I/O key group
I/O key group
Pressing the I/O key displays the following softkeys for setting the I/O interfaces.
Format Displays the softkeys for setting the data output format. See “Data Output Format”
on page 4-46.
LAN Displays the following softkeys for managing the LAN interface.
Config Displays the LAN Configuration dialog box used to set the
configuration of the LAN interface. See “LAN Configuration
dialog box” on page 4-48.
Status Displays the LAN Status dialog box which displays the status of
the LAN interface.
Reset Resets all of the LAN connections.
Defaults Sets the LAN settings to the factory default settings.
Pressing the Reset softkey or the Defaults softkey displays a confirmation dialog
box. Press the OK softkey to confirm the specified action, or press the Cancel/Local
key to cancel the action.
USB Displays the USB Status dialog box.
Easy File Access File access function setup, ON (enable) or OFF (disable).
When this is set to ON, restart this instrument. When you use
this function, connect this instrument to a PC using a USB
cable. See “File Access Function (Easy File Access)” on page
6-32.
Text display field Displays the VISA USB connect string.
Example:
USB0::2391::36376::MY12345678::0::INSTR
GPIB Displays the GPIB Configuration dialog box used to set the GPIB address of the
B2900. This dialog also displays the VISA GPIB connect string.
Example: GPIB0::23::INSTR
DIO Displays the following softkeys for managing the Digital I/O interface.
To Next Page
Loading...
Need help?
General
