4-50 Keysight B2900 User’s Guide, Edition 5
Front Panel Reference
Display key group
Display key group
Pressing the Display key displays the following softkeys for setting the display
functions. The present setting is indicated by an asterisk on the softkey label.
Remote Displays the following softkeys for enabling or disabling the front panel display
when the B2900 is in the remote mode.
OFF Disables the front panel display. Effective for fast operation.
ON Enables the front panel display.
Color Displays the following softkeys for specifying the display color set.
Set 1 Sets the color set 1.
Set 2 Sets the color set 2.
Zoom Displays the following softkeys for enabling or disabling the display zoom.
OFF Disables the zoom. Normal display.
ON Enables the zoom. Only the measured data is displayed.
Zoom-in can be cancelled by pressing the Zoom Out assist key.
In the zoom-in state, setup information is not displayed, and the measurement result
is zoomed. Then,
• the Dual view displays the primary measurement data with a large font, and the
secondary measurement data for each channel with a small font.
• the Single view displays the primary and secondary measurement data with a
large font.
Digits Displays the following softkeys for specifying the data display resolution.
4 Sets 3½ digit resolution.
5 Sets 4½ digit resolution.
6 Sets 5½ digit resolution.
7 Sets 6½ digit resolution.
Pref. Displays the Display Preference dialog box. See “Display Preference dialog box” on
page 4-51.
To Next Page
Loading...
Need help?
General
