5-8 Keysight B2900 User’s Guide, Edition 5
Front Panel Operations
To Use Functions other than Measurement
To Clear Error Buffer
1. Press the More > System > Error function keys.
2. To clear the error buffer, press Clear. To cancel the operation, press the
Cancel/Local key.
To Clear Timestamp
1. Press the More > System > Timestamp function keys.
2. Press Clear. The Confirmation dialog box opens.
3. To perform the operation, press OK. To cancel the operation, press the
Cancel/Local key.
To Set Automatic Clear of Timestamp
1. Press the More > System > Timestamp function keys.
2. Press Auto CLR.
3. To enable the automatic clear, press ON. To disable it, press OFF. To cancel the
setting change, press the Cancel/Local key.
To Display Firmware Revision
1. Press the More > System > More > Info. function keys.
2. Press Revision.
The revision information is displayed in the Revision dialog box.
Press OK to close the dialog box.
To Display License Information
Perform the following steps to display the license applied to the B2900.
1. Press the More > System > More > Info. function keys.
2. Press Revision.
The license information is displayed in the Revision dialog box.
Press OK to close the dialog box.
To Next Page
Loading...
Need help?
General
