5-26 Keysight B2900 User’s Guide, Edition 5
Front Panel Operations
To Execute Measurement
The Wait Control dialog box opens.
2. Set each parameter in the Measure column.
3. To apply the settings, press Apply.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
To Set Measurement Auto Range Operation
For details on this function, see “Ranging dialog box” on page 4-30.
1. Press the Config > Measure > Ranging function keys.
The Ranging dialog box opens.
2. In the Ch field, set the channel to which the setting change is applied.
3. Set the current measurement auto range operation (NORMAL, SPEED, or
RESOLN) in the Current Auto Ranging field.
Also, set the threshold of the auto range operation in the Threshold field.
4. Set the voltage measurement auto range operation (NORMAL, SPEED, or
RESOLN) in the Voltage Auto Ranging field.
Also, set the threshold of the auto range operation in the Threshold field.
5. To apply the settings, press Apply.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
To Enable or Disable Resistance Compensation
1. Press the Config > Measure > R Compen function keys.
2. For the 2-channel models, specify the channel to which the setting change is
applied by using the following function keys.
ALL: Channels 1 and 2 (Ch 1 and Ch 2)
Ch 1: Channel 1 (Ch 1) only
Ch 2: Channel 2 (Ch 2) only
3. To enable the resistance compensation, press ON.
To disable it, press OFF.
To cancel the setting change, press the Cancel/Local key.
To Next Page
Loading...
Need help?
General
