Keysight B2900 User’s Guide, Edition 5 5-27
Front Panel Operations
To Use Math Function
To Use Math Function
This section describes how to use the math function. For details on this function, see
“Math Expression” on page 6-17. Also, for details on the setup parameters, see
“Math Expression dialog box” on page 4-32.
1. Press the Function > Math function keys.
The Math Expression dialog box opens.
2. In the Ch field, set the channel to which the setting change is applied.
3. In the Status field, set the math function ON (enable) or OFF (disable).
4. In the Unit String field, enter the unit for the calculation result data.
To enter alphabets, press the ABC assist key and then use the numeric/alpha
keys.
To enter numbers, press the 123 assist key and then use the numeric/alpha keys.
To delete a character, highlight the character to be deleted and then press the
Delete function key.
To insert a character, highlight the character at the position where to insert the
character and then press the Insert function key.
5. Select a math expression to use.
To select a math expression, highlight the name of the math expression in the list
area below the Unit String field.
6. To apply the settings, press Apply.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
To Next Page
Loading...
Need help?
General
