166 Keysight M8070A Programming Guide
5 SCPI Command Reference
[:SOURce]:JITTer:HFRequency:SPECtrally Subnode
Spectrally distributed random jitter is composed of two jitter sources: low
frequency jitter and high frequency jitter. It is characterized by the
amplitudes of the low and the high frequency jitter part.
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 39
Name Description under
[:STATe][?] [:SOURce]:JITTer:HFRequency:SPECtrally[:
STATe][?] on page 167
:AMPLitude[?] [:SOURce]:JITTer:HFRequency:SPECtrally:
AMPLitude(*)[?] on page 167
:FILTer[:LPASs][:STATe][?] [:SOURce]:JITTer:HFRequency:SPECtrally:F
ILTer[:LPASs][:STATe][?] on page 168
To Next Page
Loading...
