Keysight Technologies J-BERT M8020A User Manual

Keysight M8070A Programming Guide 409
SCPI Command Reference 5
:PLUGin:EDIagram:FETCh[:RESult]:JRMSquare?
Syntax :PLUGin:EDIagram:FETCh[:RESult]:JRMSquare? ‘identifier’
Input
Parameters
‘identifier’: Specify the measurement name.
Description This command returns the Jitter Root-Mean Square value. It is the
standard deviation of the normal distribution of random jitter. It is
dependent on the BER Threshold.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUG:EDI:FETC:JRMS? ‘MyMeasurement’
:PLUGin:EDIagram:FETCh[:RESult]:LOLevel?
Syntax :PLUGin:EDIagram:FETCh[:RESult]:LOLevel? ‘identifier’
Input
Parameters
‘identifier’: Specify the measurement name.
Description This command returns the measurement of the mean value of the logical 1
in the eye diagram. This is directly affected by the values set for eye
boundaries.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUG:EDI:FETC:LOL? ‘MyMeasurement’
:PLUGin:EDIagram:FETCh[:RESult]:RISetime?
Syntax :PLUGin:EDIagram:FETCh[:RESult]:RISetime? ‘identifier’
Input
Parameters
‘identifier’: Specify the measurement name.
Description This command returns rise time which is a measurement of the mean
transition time of the data on the upward slope of an eye diagram. This
transition time is either 20/80 or 10/90. See
:PLUGin:EDIagram:EVALuation:TTIMe[?] on page 404
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUG:EDI:FETC:RIS? ‘MyMeasurement’

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English