Keysight N6705C - Page 242

To Next Page

To Previous Page

[SOURce:]ARB:SEQuence:STEP:CURRent:PULSe:STARt[:LEVel] <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:CURRent:PULSe:STARt[:LEVel]? [MIN|MAX,] <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:VOLTage:PULSe:STARt[:LEVel] <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:VOLTage:PULSe:STARt[:LEVel]? [MIN|MAX,] <step#>, (@<chanlist>)

Specifies the current or voltage before and after the pulse occurs for Arb sequence steps.

Parameter Typical Return

Current: 0 - maximum|MIN|MAX, *RST MIN

Voltage: 0 - maximum|MIN|MAX, *RST MIN

The maximum value varies, depending on the currentor voltage

rating of the power module.

Step 0 - 99, *RST 0 (none)

Programs a start- and end-level current: ARB:CURR:PULS:STAR 1,(@1)

Programs a start- and end-level voltage: ARB:VOLT:PULS:STAR 1,(@1)

Programs a start- and end-level for step 0: ARB:SEQ:STEP:CURR:PULS:STAR 1, 0,(@1)

[SOURce:]ARB:CURRent:PULSe:STARt:TIMe <value>, (@<chanlist>)

[SOURce:]ARB:CURRent:PULSe:STARt:TIMe? [MIN|MAX,] (@<chanlist>)

[SOURce:]ARB:VOLTage:PULSe:STARt:TIMe<value>, (@<chanlist>)

[SOURce:]ARB:VOLTage:PULSe:STARt:TIMe? [MIN|MAX,] (@<chanlist>)

Specifies the delay in seconds after the trigger is received, but before the pulse occurs. Referenced to

t0 in the Pulse diagrams.

[SOURce:]ARB:SEQuence:STEP:CURRent:PULSe:STARt:TIMe <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:CURRent:PULSe:STARt:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:VOLTage:PULSe:STARt:TIMe <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:VOLTage:PULSe:STARt:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)

Specifies the delay in seconds after the trigger is received, but before the pulse occurs for Arb

sequence steps.

Parameter Typical Return

0 – 262.144 | MIN | MAX, *RST 0 <start time>

Step 0 - 99, *RST 0 (none)

Programs a start time for the current pulse: ARB:CURR:PULS:STAR:TIM 1,(@1)

Programs a start time for the voltage pulse: ARB:VOLT:PULS:STAR:TIM 1,(@1)

Programs a start time for step 0: ARB:SEQ:STEP:CURR:PULS:STAR:TIM 1, 0,(@1)

7 SCPI Programming Reference

242 Keysight N6705C Operating and Service Guide

Related product manuals