EasyManua.ls Logo

Keysight N9010B - Page 2100

Keysight N9010B
2650 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 Input/Output
6.1 RF Source
Command
| M1 | M2 | M3 | M4 | M1M2 | M1M3 | M1M4 | M2M3 | M2M4 | M3M4 | M1M2M3 |
M1M2M4 | M1M3M4 | M2M3M4 | M1M2M3M4 | ALL, \{<waveform2>, <reps>, NONE | M1 |
M2 | M3 | M4 | M1M2 | M1M3 | M1M4 | M2M3 | M2M4 | M3M4 | M1M2M3 | M1M2M4 |
M1M3M4 | M2M3M4 | M1M2M3M4 | ALL,\}
For additional description of each item, see "For Setup SCPI" on page 2100 below
:SOURce:RADio:ARB:SEQuence[:MWAVeform]? <filename>
For additional description of each item, see "For Query SCPI" on page 2101 below
Example For setup:
:SOUR:RAD:ARB:SEQ "NVWFM:testSeq1.seq", "NVWFM:wfmSegment1.wfm",10, M2M3M4,
"NVWFM:wfmSegment2.wfm", 20, M1M3
Or
:SOUR:RAD:ARB:SEQ "D:\NVARB\testSeq1.seq", "D:\NVARB\wfmSegment1.wfm",10,
M2M3M4, "D:\NVARB\wfmSegment2.wfm", 20, M1M3
For query, must specify which waveform sequence file to query
:SOUR:RAD:ARB:SEQ? "NVWFM:testSeq1.seq"
Or
:SOUR:RAD:ARB:SEQ? "D:\NVARB\testSeq1.seq"
For Setup SCPI
For the Setup SCPI command, the parameters are:
<filename> - String Type
This variable specifies the path and name for the waveform sequence file. The path
supports MSUS (NVWFM) or a real full path representation. See example.
<waveform1> - String Type
This variable specifies the path and name of the first existing waveform segment.
The path supports MSUS (NVWFM) or a real full path representation. See example.
The segment file must reside within ARB playback memory before it can be played
by the ARB player.
<reps> - Integer Type
This variable specifies the number of times a segment or sequence plays before
moving on to the next segment or sequence.
<marker> - Enum Type
NONE This choice disables all four markers for the waveform. Disabling markers
means that the waveform sequence ignores the segments or sequence marker
settings.
M1, M2, M3, M4 these choices, either individually or a combination of them,
enable the markers for the waveform segment or sequence. Markers not specified
are ignored for that segment or sequence.
Vector Modulation Analyzer Mode User's &Programmer's Reference 2100

Table of Contents

Other manuals for Keysight N9010B

Related product manuals