Keysight N9010B - How to Return Your Instrument for Service

Table Of Contents
Marker Trace 1475
3.9.18 Meas Setup 1475
3.9.18.1 Settings 1475
Avg/Hold Num 1475
Continue Averaging 1476
SEM Terminal Count (Remote Query Only) 1476
Averaging On/Off 1477
Meas Method 1477
RRC Filter Alpha 1478
Non-Contiguous Meas Region 1478
Sweep Type Rules 1478
Mask State 1479
Mask Standard 1480
Spur Avoidance 1481
Offset/Limits Config Table 1481
Offset (Bandwidth) 1482
Offset Freq Define 1483
Offset Detector 1487
Offset Average Type (Remote Command Only) 1488
Start Freq 1489
Stop Freq 1493
Res BW 1495
Meas BW 1497
Video BW 1498
VBW/RBW 1499
Offset (Sweep) 1500
Offset Freq Define 1500
Offset Detector 1501
Start Freq 1501
Stop Freq 1501
Sweep Time 1501
Minimum Acquisition Time 1502
Sweep Time Annotation (Remote Query Only) 1503
Sweep Type 1504
Offset Side 1505
Limits 1506
Start Freq 1506
Stop Freq 1507
Abs Start 1507
Abs Stop 1509
Rel Start 1513
Rel Stop 1515
Fail Mask 1517
Show Abs2 Limit 1519
Abs2 Start 1519
Abs2 Stop 1520
Fail Mask2 1521
Inner Offset (BW) 1522
Vector Modulation Analyzer Mode User's &Programmer's Reference 43