Keysight Truevolt Series User Manual

[SENSe:]FREQuency:SECondary {"OFF"|"CALCulate:DATA"|"PERiod"|"VOLTage:AC"}
[SENSe:]FREQuency:SECondary?
Selects the secondary measurement function for frequency measurements.
Parameter Typical Return
{"OFF"|"CALCulate:DATA"|"PERiod"|"VOLTage:AC"},
default "OFF"
"CALC:DATA"
Configure frequency measurements, select period as the secondary measurement, make and retrieve meas-
urements.
CONF:FREQ MAX, MAX
FREQ:SEC "PERiod"
READ?;DATA2?
Typical Response: +1.22230020E+02;+8.18129619E-03
l "CALCulate:DATA" - (Applies only to the 34465A and 34470A.) The measurement value before any
math operations are done (including NULL).
l “PERiod” - The period measurement of the input signal.
l "VOLTage:AC" - The AC voltage measurement of the input signal.
l This parameter is set to its default value after a Factory Reset (*RST) or Instrument Preset
(SYSTem:PRESet).
[SENSe:]PERiod:SECondary {"OFF"|"CALCulate:DATA"|"FREQuency"|"VOLTage:AC"}
[SENSe:]PERiod:SECondary?
Selects the secondary measurement function for period measurements.
Parameter Typical Return
{"OFF"|"CALCulate:DATA"|"FREQuency"|"VOLTage:AC"},
default "OFF"
"CALC:DATA"
Configure period measurements, select frequency as the secondary measurement, make and retrieve meas-
urements.
CONF:PER MAX, MAX
PER:SEC "FREQ"
READ?;DATA2?
Typical Response: +8.90363477E-03;+1.12313682E+02
l "CALCulate:DATA" - (Applies only to the 34465A and 34470A.) The measurement value before any
math operations are done (including NULL).
l “FREQuency” - The frequency measurement of the input signal.
l "VOLTage:AC" - The AC voltage measurement of the input signal.
l This parameter is set to its default value after a Factory Reset (*RST) or Instrument Preset
(SYSTem:PRESet).
SCPI Programming Reference
344
Keysight Truevolt Series Operating and Service Guide

Keysight Truevolt Series Specifications

General

Brand	Keysight
Model	Truevolt Series
Category	Measuring Instruments
Language	English