Kubota WSM 05-E4B Series - Checking Brush Holder of Starter; Checking Armature Coil of Starter; Checking Field Coil of Starter

6.45 Checking brush holder of
starter
Tools required
• Circuit tester
1. Check
the continuity across the brush holder and
the holder support with a circuit tester.
NOTE
• If electricity flows,
replace the brush holder
assembly.
Resistance be-
tween brush hold-
er and holder sup-
port
Service specifi-
cation
Infinity
6.46 Checking armature coil of
starter
Tools required
• Circuit tester
1. Check
the continuity across the commutator and
armature coil core with the resistance range of
circuit tester.
NOTE
• If electricity is
out of service specification,
replace the armature assembly.
Resistance be-
tween commutator
and armature coil
core
Service specifi-
cation
Infinity
2. Check the continuity across the segments of the
commutator with
the resistance range of circuit
tester.
NOTE
• If electricity is
out of service specification,
replace the armature assembly.
Resistance be-
tween commutator
and segment
Service specifi-
cation
Continuity
6.47 Checking field coil of starter
Tools required
• Circuit tester
4. ENGINE
SERVICING
6. Servicing
4-76
05-E4B SERIES,05-E4BG SERIES
KiSC issued 03, 2023 A