Kubota WSM 05-E4B Series - Special Tools

SPECIAL TOOLS
1. Diesel engine compression
tester (for nozzle hole)
Use to measure
diesel engine compression and
diagnosis of need for major overhaul.
(1) Gauge
(2) L joint
(3) Adapter A
(4)
Adapter B
(5) Adapter C
(6) Adapter E
(7) Adapter F
(8) Adapter G
(9) Adapter H
(10) Adapter I
(11) Adapter J
Code No.
•
07909-30208 (Assembly)
•
07909-30934 (A to F)
•
07909-31211 (E and F)
• 07909-31231 (H)
• 07909-31251 (G)
• 07909-31271 (I)
• 07909-31281 (J)
Adapter
• 07909-31231 (H) for 05 series.
2. Injection pump pressure
tester
Use to check fuel tightness of injection pumps.
NOTE
• This special tool
is not provided. Make it
referring to the figure.
A
Pressure gauge full scale:
More than 29.42 MPa (300.0 kgf/cm
2
,
4267 psi)
B PF 1/2
C Copper gasket
D Flange (Material: Steel)
E Hex. nut 27 mm (1.1 in.) across the plat
F Adhesive application
G Fillet welding on the enter circumference
H Retaining nut
I 17 mm dia. (0.67 in. dia.)
(Continued)
SPECIAL TOOLS
1. Diesel engine compression tester (for nozzle hole) 2. GENERAL
05-E4B SERIES,05-E4BG SERIES
2-31
KiSC issued 03, 2023 A